JWTECH.co.,LTD LOGO








  Industrial Automation > Signal Conditioners > | Process Inputs | Frequency Input | Tempreature Inputs
 
Signal
Conditioners

 

 
 
 
 
Red Lion provides a broad selection of signal conditioners for frequency, temperature and process applications. Our signal conditioners range from dedicated to universal models capable of accepting over 100 inputs, which allows these units to be used almost anywhere.
 
Frequency Input

IFMA Series

The IFMA series signal conditioners accept frequency inputs, and output analog voltage ore current in proportion to the inputfrequency with 0.1% accuracy. The IFMA can accept any frequency source input from 1 Hz to 25 KHz. Our sign conditioners can beeasily configured using a seven position DIP switch, rotary switch and/or push-button. The input circuitry is also DIP switch selectable for a variety of sources.

LED lights on the face of the unit illuminate under normal operation to display the input  and output status of the IFMA. These LEDsare also used  to provide visual feedback for device configuration. The unit is equipped with a universal mounting foot and can be mounted to either a top hat (EN 50 022) or a g profile (EN 50 035-G32) DIN rail.

Part # Title
IFMA0035 Frequency to Analog Convert DC Powered
IFMA0065 Frequency to Analog Convert AC Powered

 

IFMR Series

The IFMR series signal condtioner accepts frequency inputs, and controls a single relay (SPDT) based on the value of the inputfrequency. The relay can be set to trip based on any input value from 0.1 Hz to 25 KHz. The IFMR can be set to trip on overspeedor underspeed (including zero speed) . Offset and hysteresis values can be incorporated into the trip setting to eliminate falseoutputs. Two separate input connections are available for external push-buttons are provided and override to the relay tripdetection. This override holds the relay in the release state as long as the input is connected. The other external input clears alatched trip condition when pulled.

The IFMR signal conditioners can be easily configured using a seven position DIP switch. Rotary switch and/or push-button. Theinput circuitry is also DIP switch selectable for a variety of sources.

The IFMR operates in one of six user selectable outpur modes. The programmable minimum rssponse time privides optimumresponse versus input filtering for any input frequency. The offset and hysteresis settings provide flexible adjustment of the relaytrip and release points.

LED lights on the face of the unit are illuminated during normal opreation to display the input and output status of the IFMA.These LEDs anre also used to provide visual feedback durin configuration. The unit is equipped with universal mounting footand can be mounted to either a top hat (EN 50 022) or a G profile (EN 50 035-G32) DIN rail.
Part# Title
IMFR0036 Speed Switch DC Powered
IFMR0066 Speed Switch AC Powered




Temperature Inputs

IRMA Series

The IRMA signal conditioner accepts RTD or reesistance inputs and converters them into a voltage or current output. The output islinearly proportional to the temperature or resistance input. This output is ideal for interfacing to indicators, chart recorders,controllers, or other instrumentation equipment.

The IRMA is DC powered and provides full isolation form the signal input and analog output. The ananlog output may be configuredfor one of the following : 0 to 20 mA, or 0 to 10 VDC.

They can easily be configured using an eight position DIP switch. A simple range setting technique (field calibration) is used so theactual input signal adjusts the output for scaling. This technique eliminated the need for potentionmeters which are vulnerable tochanges due to vibration.

MThe unit is equipped with a universal mounting foot and can be mounted to either to top hat (EN 50 022) or a G profile (EN 50 035-G32) DIN rail.

Part# Title
IRMA2003 Intelligent RTD Module with Analog Output Loop Powered.
IRMA3035 Intelligent RTD Module with Analog Output DC Powered.


ITMA Series

The ITMA accepts thermocouple or millivolt inputs and converts them into a voltage or current output. The voltage or current outputis linearly proportional to the temperature or millivolt input. This output is ideal for interfacing to indicators,chart recorders,controllers or other instrumentation equipment.

The ITMA is available to two versions, loop-powered or DC powered. The loop-powered unit means that the same two wires arecarrying both the power and the output signal. The unit controls the output current draw from 4 to 20 mA in direct proportion to theinput change while consuming less than 4 mA for power. The DC powered unit has the DC power input isolated from the signal inputand the analog output. The DC unit scales the analog output proportionally to the thermocouple or millivolt input signal. The analogoutput may be configured for one of the following : 0 to 20 mA, 4 to 20 mA, or 0 to 10 VDC.

The ITMA siganal conditioners can be easily configured using a ten position DIP switch. A simple range setting technique (fieldcalibration) is used so the actual input signal adjusts the output for scaling. This technique eliminated the need for potentiometers.which are vulnerable to changes due to vibration.

The unit is equipped with a universal mounting foot and can be mounted to either a top hat (EN 50  022) or a G profile ( EN 50 035-G32) DIN rail.

Part# Title
ITMA2003 Intelligent Themocouple with Analog Output Loop Powered
ITMA3035 Intelligent Themocouple with Analog Output DC Powered




Process Inputs

IAMS Series

The IAMS series are univeral signal conditioners with unmatched capability and provide more than 100 combinations of I/Ocombination configurations. The IAMS series provides complete isolation and conversion capabilities ot satisfy andy application. Theuniversal input accepts process, DC current, DC voltage, Thermocouples, RTDs, potentionmeters and linear resistance signals allowingThe Module to be connected to most sensors.

Setpoint models allow for dual setpoint control capability through dual form A relays. The analog model provides a retransmittedanalog signal. A third model provides both analog and dual setpoint control capabilities.

The IAMS can be configured using the PGMMOD programming module. The module is required to program the IAMS but only oneprogramming module is regardless of the quantity of IAMS signal conditioners. The module can store programming formone unit and mirror it to a second unit reducing set-up time for multiple installations.

The unit's accuracy typicall exceeds 0.1% depending on the range selection and scaling. The microprocessor based design providesease of field scaling and the onboard E2PROM stores scaling values for future recall. All units are factory calibrated for all I/O ranges.Factory or custom field scaling can be selected in the advanced programming loop. The IAMS is flexible enough; it can even berecalibrated in the field.

The unit is equipped with a univesal mounting foot and can be mounted to a top hat (EN 50 022) DIN rail.

Part# Title
IAMS0001 IAMS with Analog Output
IAMS0010 IAMS with Dual Setpoint
IAMS0011 IAMS with Analog & Dual Setpoint

 

IAMA0006

Configurable 3-Way Isolating Amplifier
Specifications :
*  3-way Isolation of Analog Signals.
*  Over 35 Input And Output Analog Conversion Combinations.
*  Universal Conversion Module -  Inputs and Outputs Selected Via Dip Switch Settings.
*  Ultra Slim Design - Only 0.244" Wide.
*  19 To 30 VDC Power


AIMI0202

Red Lion’s AIMI series provide passive electrical isolation and processing of analog 0 to 20 mA, or 4 to 20 mA current signals. The AIMI is loop powered and perfect for connecting control and process equipment.

0 (4) to 20 mA Passive Loop Powered Isolator
Specifications :
*  0 (4) to 20 mA Passive Loop Powered Isolator
*  Provides Input/Output Isolation



AFCM Series

The AFCM series of signal converters, from Red Lion, convert process current/voltage signals to user definable output frequency signals. Providing simple operation, the AFCM series is available with 0 to 5 Hz or 0 to 10 KHz models.

Analog to Frequency Converter Module
Specification :
*  voltage/ current to frequency converter
*  3-way isolation of input/output signals
*  universal conversion module-inputs and output selected via DIP switch setting
*  ultra slim Design-Only 0.244" wide
*  19 to 30 VDC Power


 

LiveZilla Live Chat Software
   JWTECH.CO.LTD., Tel: (662) 733 7702 (Auto), Fax: (662) 733 7703 COPYRIGHT 2011
JWTECH.CO.LTD., ALL RIGHTS RESERVED.   

PLC | Servo | Inverter | HMI | Instruments | Blog