JWTECH.co.,LTD LOGO








  Industrial Automation > DIN Rail Mount Controllers > | Modular Contrller Series | DLC Series
 
Modular Contrller Series
Overview :
The CSMSTR Modular Controller allows for a custom controller to be configured for each application. The CSMSTR allows up to 16 slave modules to be connected and powered to a single master controller.
 
Performance :
The Modular Controller provides a platform that can be updated to operate in a wide variety of applications by simply plugging in I/O modules that meet the requirements of the application. Upon installation of modules, the CSMSTR automatically identifies and addresses connected slave modules simplifying deployments and reducing technical requirements. The CSMSTR automatically configures modules if they are replaced, by storing configuration files of each associated module.
 
Communication :
The CSMSTR Modular Controller provides high-speed RS232/422/485 communication ports and a 10/100Base-T(X) Ethernet port for connection to PCs, PLCs, and SCADA systems. An extensive list of master and slave protocol drivers are available to allow the CSMSTR to share and exchange variable data with external devices.
 
Option :
The CSMSTR offers a virtual HMI feature allowing for monitoring and control of an HMI from any networked PC. The virtual HMI is available in three different resolutions (320 x 240 or 640 x 480 or 1280 x 720).
 
 
Part # 
Title
CSMSTRGT CSMSTRGT - Data Logger/Web Server with Virtual HMI up to VGA
CSMSTRLE CSMSTRLE- Protocol Converter
CSMSTRSX CSMSTRSX- Data Logger/Web Server with Virtual HMI up to QVGA
CSMSTRV2 CSMSTRV2- Control and Communication
CSMSTRZR CSMSTRZR-High Performance Protocol Converter, Data Logger
   

 
DLC Series
Overview :
Red Lion's DLC series of PID controllers offer two independent input channels which can be configured to accept a wide range of thermocouple, RTD, 0-10 V, 0/4-20 mA, or resistive signals. Each channel can be independently configured to extract the square root of the input in both process voltage or process current modes for applications such as flow measurement using a differential flow sensor. Channel B can be assigned as a remote setpoint for channel A.
 
Alarms :
The dual time proportioning or DC analog outputs can be programmed to control two independent processes and feature up to two alarms per channel which can be configured for various alarm modes, or can provide a secondary control output for heat/cool applications. The control and alarm outputs are N channel open drain MOSFETs which are capable of switching up to 1 amp DC.
 
Option :
The DLC controller operates in the PID control mode for both heating and cooling with on-demand auto-tune which establishes the tuning constants. The PID tuning constants may be fine-tuned through the serial interface. The controller employs a unique overshoot suppression feature, which allows the quickest response without excessive overshoot. It can also be transferred to operate in the manual mode, providing the operator with direct control of the output, or the on/ off control mode with adjustable hysteresis.
 
Part #
Title
DLC00001 Dual Loop Controller with Dual Isolation
DLC01001 Dual Loop controller with 2 Analog Output
DLC11001 Dual Setpoint controller with 2 Analog Outputs.
 
   


LiveZilla Live Chat Software
   JWTECH.CO.LTD., Tel: (662) 733 7702 (Auto), Fax: (662) 733 7703 COPYRIGHT 2011
JWTECH.CO.LTD., ALL RIGHTS RESERVED.   

PLC | Servo | Inverter | HMI | Instruments | Blog